Locally owned & operated · Jacksonville, St. Johns & ClayMon–Sat: 7:00 AM – 7:00 PMCall now: (904) 561-1816
Armadillo Drainage Solutions

Pavers · Jacksonville

Pavers in Jacksonville, FL — driveways, patios & sealing

Concrete pavers, travertine and paver sealing across the City of Jacksonville — Mandarin, Southside, San Marco, Avondale, Ortega and Arlington — with the drainage built into the driveway.

Free yard inspection within 48 hours · written price before we dig

Paver driveway in Jacksonville, half cleaned and sealed, half faded
InsuredNDS-trained drainage crew
Free inspectionwithin 48 hours
Written pricebefore we dig
Local Jacksonville crewbased in Mandarin

Pavers in Jacksonville, FL go down on some of the oldest housing on the First Coast. The city counts roughly 253,000 detached houses with a median build year of 1986, 57 percent of them owner-occupied, and a median owner-occupied value around $266,000 (Census ACS 2023). That mix decides most paver work here: 1980s concrete driveways that have cracked and dropped at the apron, older paver walks that live oaks have lifted, and owners who want a driveway that looks good without sending water toward the garage.

We are a drainage crew that lays and restores pavers, so a Jacksonville paver job starts with where the water goes. Concrete pavers from Belgard and Tremron, or travertine for a patio, go on a compacted base with edge restraint and a slope away from the house. Where the driveway runs toward the garage, a channel drain is set across the apron as the pavers are laid instead of being cut in later. For existing pavers, cleaning, re-sanding with polymeric sand and sealing every two to three years brings the color back and keeps the joints full.

What Jacksonville pavers need

Cracked concrete driveway to pavers

A poured driveway from the 1980s that has cracked at the joints and sunk at the street end is broken out, the base rebuilt and compacted, and pavers rated for vehicles laid in its place.

Roots under the walk

Under live oaks, roots push paver walks and driveway edges up. We lift the section, rebuild the base around the root zone and relay the same pavers where they can be reused.

Water running at the garage

Lots that settled toward the house send the driveway's water straight at the garage door. A channel drain across the apron, tied to pipe, is built into the new pavers.

Sun-faded driveways

Jacksonville sun turns pavers chalky and gray. Pressure cleaning, polymeric sand in the joints and a sealer bring the color back — driveways from $899.

Paver prices in Jacksonville

Paver driveway or patio, installedBelgard, Tremron and travertine; channel drain built in where needed$12 – $25 / sq ft
Paver cleaning, re-sand & sealdriveways from $899; repeat every 2–3 years$1.25 – $3.50 / sq ft
Channel drain at the driveway apronset into the pavers as they are laid, tied to pipe$500 – $1,500

Materials and labor, 2026 ranges for our service area. The inspection is $0; your price is written down before work starts.

Rough out your driveway or patio

Enter the square footage, pick new pavers, sealing or a relevel, and see the range in seconds.

Paver cost calculator

Neighborhoods we cover in Jacksonville

Mandarin, Southside, San Marco, Avondale, Ortega and Arlington. Our truck starts the day in Mandarin, so the south side of the city is closest, but every neighborhood above sits well inside our 25-mile radius.

Pavers in Jacksonville: FAQ

Is a paver driveway worth it in Jacksonville?

On sand over hardpan, pavers on a compacted base flex instead of cracking, a sunken section can be lifted and relaid instead of replaced, and a channel drain can be built in. They cost more up front than plain concrete: $12 to $25 per square foot installed in our area, about $8,000 to $20,000 for a 600 to 1,000 square foot driveway.

Do you need a permit for patio pavers in Jacksonville?

A patio on your own lot usually does not involve the city. The driveway apron at the street does, because it sits in the City of Jacksonville right-of-way and needs a city permit; when your job includes it, the permit is part of the written scope.

Which paver brands do you install?

Belgard and Tremron concrete pavers, and travertine. Tremron is common in Jacksonville subdivisions, which makes it easier to match an existing driveway when only a few sections are relaid.

How much does it cost to seal pavers in Jacksonville?

Cleaning, re-sanding and sealing runs $1.25 to $3.50 per square foot. A 600 square foot driveway is about $900 to $2,000, and driveways start from $899.

Prefer a call back?

Name and number. That's it.

We call back during service hours to set your free inspection — usually within the hour. Free yard inspection within 48 hours · written price before we dig.

How it works

From inspection to sealed pavers in Jacksonville

01

Call or send a photo

Call, or use the form and attach a photo of the puddle. Tell us when it rained.

02

Inspection in 48 hours

We walk the yard, check downspouts and grades, and sketch a drainage plan with the outlet marked.

03

Written price

The plan, the materials and the price in writing. Nothing starts until you approve it.

04

We dig, install, restore

Trench, pipe, gravel, basins — then backfill, compaction and sod put back.

Free inspection

Free paver quote in Jacksonville

Send the square footage, a photo of the driveway, patio or pool deck and your ZIP. We measure within 48 hours and write the price down before work starts.

(904) 561-1816
  • Free yard inspection within 48 hours
  • Insured · NDS-trained drainage crew
  • Written price before we dig
  • Mon–Sat: 7:00 AM – 7:00 PM
Armadillo crew member beside the inspection form

Free yard inspection within 48 hours · written price before we dig

We reply during service hours, usually within the hour.

Call (904) 561-1816Free inspection in 48h